Sharpening stone ≠2000 RISAM®

  • Brands RISAM
  • Product Code: RW120
  • Availability: In Stock

Medium grits 2000 one side whetstone.

The RISAM® sharpening stones are made from professional grade white corundum (Al2O3), corrosion-resistant, heat-resistant, with edges and corners clearly demarcated. 
Ideal for sharpening Japanese knives, Damascus knives or other high hardness knives.
Equipped with silica gel non-slip base for safe sharpening.

The medium coarse side #2000 grit refreshes the edge of the knife in order to be prepared for finer grinding. The #2000 grit sharpening stone is one step after the coarse whetstones and it prepares the edge for the fine grinding of the high number whetstones. Nevertheless, the knife is not dull anymore. 

Using Instructions:

1. Soak the stone in the water for 5 minutes, and then put it on a steady platform. Sharpening the knives with one or two steps is decided by the degree of blunt tool.

1000 medium grit, used to repair the semi dull edge.
Hold the knife at an angle of 10° - 20°, depending on the knife's angle and grind the edge on the surface of the stone back and forth with gentle pressure. Keep sharpening it until the edge is sharp enough.
After sharpening the tool, it needs to be honed with coarse grinding after three months. It also depends on the specific situation.

2.Wipe it with wet cloth or rinse it with water after sharpening the tool, and then dry it. Clean the stone surface with a soft brush and put it in the air to make it dry.

Technical Specifications
Brand RISAM®
Country of origin China
Dimensions 180 x 65 x 19 mm
Grain #2000
Sides Single